K-series axial tension sensor

Categorisation: Web tension sensor

The k-series axial sensor adopts a full bridge detection method. The internal adopts an 8-shaped structure, which can effectively reduce measurement errors and surpass similar products internationally! This product can be installed through flange or shaft mounted installation.

>> Messages

>> Contact

Detail

Product Description:

This product can be installed through flange or shaft mounted installation.

Product features

The principle of combining cantilever double beams with semiconductor strain gauges;
Dust proof, waterproof, and corrosion-resistant, with good linear output signal and fast response;
Compact in size, especially suitable for situations with limited installation space;
Built in bearings, can be installed in conjunction with Sui wheel rollers or live wheel rollers;
Built in temperature compensation device, no additional temperature compensation required

Installation diagram:

Product dimension

Product specification

Detector coding	Rated Load（KG）	Dimensions（mm）
Detector coding	Rated Load（KG）	A	B	C	D	H	I	G	E	F	M
K105-50	0-50	17	60	22	105	16	36.5	88	75	6.5	3
K105-100	0-100	17	60	22	105	16	36.5	88	75	6.5	3
K125-75	0-75	25	70	31	125	18	47.5	98	95	6.5	4
K125-150	0-150	25	70	31	125	18	47.5	98	95	6.5	4
K175-100	0-100	35	100	44	175	23	65	123	135	8.5	4
K175-150	0-150	35	100	44	175	23	65	123	135	8.5	4
K175-300	0-300	35	100	44	175	23	65	123	135	8.5	4
K225-500	0-500	50	130	64	225	23	75	148	175	10.5	4
K265-600	0-600	65	160	80	265	33	80	168	220	10.5	4
K265-1000	0-1000	65	160	80	265	33	80	168	220	10.5	4

Product parameter

Excitation voltage	12DVC	Strain gauge resistance value	350Ω
Tension output signal	0.2mv	Maximum overload capacity	200%
Detection accuracy	0.2%	Sensitivity (voltage output) usually	1.6Mv/v
Detection Principle	Strain gauge bridge	Ambient humidity	98R.H
Detection type	Full Bridge Mode	Temperature drift	0.011%/℃
Error system (scale hysteresis, repeatability, linear error)	Less than ± 0.05% of final measured value