CF series flange tension sensor

Categorisation: Web tension sensor

Flange type tension sensor is installed at both ends of the tension roller to measure the combined force of the coil passing through the tension roller at a certain wrap angle, with extremely high measurement accuracy and linearity, and extremely low comprehensive error. This product has a compact structure and is suitable for installation from various angles. It has excellent performance and high cost-effectiveness, and is generally suitable for various winding equipment with medium and low loads.

>> Messages

>> Contact

Detail

Product Description:

Product features:

The product is installed on the inside of the rack, with a flange type installation;

High repetition accuracy and no output lag;

High cost-effectiveness;

Compact in size;

Sensitive response and high accuracy.

Product specifications

	A	B	C	D	E	F	∅pivot S	L	Type	Range(daN)
SX-CF.85	85	70	6.5	50	5	3	15-17-20-25	63	SX-CF.85.15	0÷15
SX-CF.130	130	108	10.5	75	5	5	35-30-35	85	SX-CF.85.15	0÷15
∅pivot S	Width G				Ball bearing 22002RS				SX-CF.85.25	0÷25
15	14				15x35x14				SX-CF.85.25	0÷25
17	16				17x40x16				SX-CF.85.50	0÷50
20	18				20x47x18				SX-CF.85.100	0÷100
25	18				25x52x18				SX-CF.130.100	0÷100
30	20				30x62x20				SX-CF.130.250	0÷250
35	23				35x72x23				SX-CF.130.500	0÷500

Product parameter

Excitation voltage	10DVC	Strain gauge resistance value	350Ω
Tension output signal	0-20mv	Maximum overload capacity	200%
Detection accuracy	0.2%	Sensitivity (voltage output) usually	1.6Mv/v
Detection Principle	Strain gauge bridge	Ambient temperature	-38 ±55º
Detection Type	Full Bridge Mode	Ambient humidity	98R.H
Error system (scale hysteresis, repeatability, linear error)	Less than ± 0.05% of final measured value	Temperature drift	0.011%/℃